Name：High-frequency induction heating equipment
Description：
I High-frequency heating equipment characteristics
1、Adopt high-power IGBT and MOSFECT components from international
famous company with perfect fault auto-diagnosis alarm system and
high reliability assurance.
2、There is ordinary type, automatic type, shafts quenching
dedicated type can be chosen.
3、Big power, output power can be continuously adjusted, with good
protection function of overheat, overpressure and overcurrent .
4、Small volume, light weight, easy installation, common personnel
can master installation and operation in 10mins.
5、High efficacy, low electric consumption, energy saving, save
electricity 60% than traditional high-frequency equipment.
6、Safe and reliable, no million volts high-pressure, it is quite
safe for operating personnel.
7、Demountable inductor, it can make all sorts of different inductor
according to customer’s workpieces demand.
8、Wide frequency band, can satisfy different workpieces brazing,
heat treatment, heat before forging.
9、Unique cooling circulatory system, to ensure the equipment
continuously works in 24 hours.
10、The equipment operation is simple, easy to control, can point
control , remote control, it can be equipped with timing devices
according to the requirement , etc .
II High-frequency equipment application range
1、Heat treatment: Apply to metal parts’ local or whole quenching,
annealing and tempering of all kinds of auto parts, motorcycle,
hardware tools, gears, chain wheel, steam-driven, hydraulic
fittings, etc.
2、Heat forming: Whole , local diathermy of small size workpieces
and heat upsetting &heat rolled of twist drill ,etc.
3、Soldering: Soldering of all kinds of turning tool, carpentry
cutter, drill bit, saw bit & saw tooth, steel pipes, copper
tube, the same and dissimilar metal welding.
4、Metal smelting: gold, silver, copper, iron, aluminum (vacuum)
smelting, casting molding and evaporation coating;
5、Other application: Semiconductor single crystal growth, shrink
fit, bottleneck hot-seal and toothpaste tubes hot-seal, powder
coating, metal implanted into plastics etc.
III Equipment technical parameters:
Model | XG-25 | XG-30 | XG-40 | XG-50 | XG-60 | XG-80 | XG-100 | XG-120 | XG-160 | XG-200 |
Input power supply | Three phases 380V 50-60 HZ |
Input power | 25KVA | 30KVA | 40KVA | 50KVA | 60KVA | 80KVA | 100KVA | 120KVA | 160KVA | 200KVA |
Oscillation frequency | 20-80
KHZ | 20-60
KHZ | 20-60
KHZ | 20-50
KHZ | 20-50
KHZ | 20-40
KHZ | 20-40
KHZ | 20-40
KHZ | 20-40
KHZ | 20-40
KHZ |
Working Water pressure | 0.1-0.3Mpa | 0.15-0.3Mpa |
Product category | All-in-one A Ordinary B:Automatic control | Fission machine A: Ordinary B: Automatic control |
